Valley Medical Pharmacy 
630 Main Street 
Brawley, CA 92227 
eRx ID#0585957 
1 (800) 322-0808 | Toll Free Fax: 1 (855) 322-0808 
Email: drugsdepot@yahoo.com 
Web: www.drugsdepot 
Timing: Monday to Friday | 9:00 AM to 5:45 PM 


First Progest Vgs 100 Mg Suppository 30 By Cutis Pharma.

Image 0 of First Progest Vgs 100 Mg Suppository 30 By Cutis Pharma.Image 1 of First Progest Vgs 100 Mg Suppository 30 By Cutis Pharma.

First Progest Vgs 100 Mg Suppository 30 By Cutis Pharma.

Call for Price

First Progest Vgs 100 Mg Suppository 30 By Cutis Pharma. This Item Requires A Valid Order From A Physician Licensed in USA. Item Number.:RXD3627817/RXB10022985/RXA390752
Size : 30
Selling UoM : EA
NDC: 65628-0062-01
UPC Barcode : 365628062015
Supplier: 0050001972 CUTIS PHARMA INC
Supplier Material : 006201
Generic Code : 058044 PROGESTERONE VAGINAL SUPP.VAG 100 MG
Fine Line Class : 850085008510 All Rx Products
Product Category : RX Pharmaceuticals
Product Type : BRX Bra

Have a question?

  Call for Price

Product Description.:

Active Ingredients:
Progesterone (wettable) ? 3.0 g

Inactive Ingredients:
Fatty acid base ? 66.0 g

Other Components:
30-unit suppository mold with caps Stirrer Suppository filling tool
Guide Plate 30-unit suppository mold cover with suppository dispensing tool attached

Click Here for Prescribing Information

FIRST Progesterone VGS Compounding Kist contains pre-weighed progesterone powder and pre-weighed fatty acid base in sufficient quantity for the pharmacist to prepare 30 vaginal suppositories, each containing 25, 50, 100, 200or 400 mg of progesterone. Important - Prior to compounding and dispensing, read the instructions completely and make certain that all the components are present.

1. Remove the cap from jar containing fatty acid base and melt the base placing the jar in a standard microwave. Melting times may vary depending on the type of microwave used. It is recommended that you initially set the timer for 1 minute and check to see if the base has melted. If it has not, return the jar of base to the microwave for 15 second increments until the base is completely melted. Generally, the fatty acid base will completely melt between 1 and 3 minutes. DO NOT OVERHEAT.

2. Tap the top and bottom of the bottle to loosen the progesterone powder and remove the cap. Empty the entire contents of the bottle into the jar containing the melted fatty acid base. It is recommended that you also tap the bottom and sides of the bottle while emptying.
The appropriate quantity of progesterone powder has been packaged in the bottle to deliver enough progesterone to provide the proper concentration for each suppository.

3. Using the stirrer provided, carefully stir the progesterone powder in the melted fatty acid base until an homogeneous suspension is apparent (30 to 60 seconds). Be careful not to stir so vigorously as to spill the suspension outside the jar.

4. With an even flow, carefully pour the entire suspension from the jar onto the 30-unit suppository mold in a circular motion filling each of the 30 suppository cavities.

Using the suppository filling tool provided, spread the suspension evenly over the suppository cavities until all the cavities are completely filled.

5. Place the provided guide plate onto the mold with the 30 raised guide holes facing upward. Make certain the notches on the guide plate align with notches on suppository mold. This will ensure that the 30 suppository cavities are aligned with the raised holes in the guide plate. Gently push the guide plate down to lock it in place. It is important that you fit the guide plate properly in order for your patient to dispense the suppositories easily.

Place the provided cover with attached suppository dispensing tool onto the suppository mold. Store entire unit at refrigerated temperature for at least 15 minutes in order to allow the suppositories to solidify. Visually check the suppositories for solidification before dispensing the entire unit to your patient.

6. Make certain to instruct your patient how to dispense each suppository for daily use. Using the suppository dispensing tool attached to the mold cover, place the tip of the tool into the guide plate and with a firm force push the suppository through. Your patient should refrigerate the mold at least 1 hour for total solidification before dispensing the first suppository for use. Important: Be sure to instruct your patient to remove the red suppository cap from the suppository before inserting each suppository.